Basic Blueprint Reading and Sketching (9th Edition)
Verified Answer ✓
Located at lower right of the technical drawing more
Verified Answer ✓
The indicated material in the worksheet is cast ... more
Verified Answer ✓
Located at the lower right corner of the technical... more
Verified Answer ✓
The overall width ( length ) of the angle bracket ... more
Verified Answer ✓
The overall height of the cross slide is 187... more
Verified Answer ✓
Overall depth is the total distance between top ... more
Verified Answer ✓
In mathematics dimension is the measure of a ... more
Verified Answer ✓
The dimension ofis 0.38 more
Verified Answer ✓
The line C in the right-side view is represented ... more
Verified Answer ✓
Verified Answer ✓
Line D in the right-side view is represented by ... more
Verified Answer ✓
Surface F in the front view is represented by line... more
Verified Answer ✓
Thick dark lines which pertain to visible edges more
Verified Answer ✓
Surface O in the right-side view is represented by... more
Verified Answer ✓
Surface H in the top view is represented by Line E... more
Verified Answer ✓
Surface H in the top view represent line C in the ... more
Verified Answer ✓
Line C, D, E, K and L describe the shape of an ... more
Verified Answer ✓
Lines A ans B are parallel lines. more
Verified Answer ✓
The encircled letter that denotes an extension ... more
Verified Answer ✓
The encircled letter that denotes an object line ... more
Verified Answer ✓
given that material use is grey color CAST IRON more
Verified Answer ✓
Located at upper right corner of the technical ... more
Verified Answer ✓
Can be seen in the top view more
Verified Answer ✓
It is written in the upper right side of the ... more
Verified Answer ✓
The overall height of cross slide is 187... more
Verified Answer ✓
Hidden lines represent edges that are not visible ... more
Verified Answer ✓
mark A represents the circumference or periphery ... more
Verified Answer ✓
Hidden lines to represent the slot more
Verified Answer ✓
The line representing slot line is dotted line ... more
Verified Answer ✓
in front view it is represented by G more
Verified Answer ✓
H line represent it more
Verified Answer ✓
Surface J in the front view is represented by line... more
Verified Answer ✓
P line represents it more
Verified Answer ✓
The diameter of the holes is 21 more
Verified Answer ✓
center to center dimension of holes = 1+1/4 = 1.25 more
Verified Answer ✓
it's distance is (5/8) more
Verified Answer ✓
Holes are drilled through all the way with depth ... more
Verified Answer ✓
width of slot in front view = (1+3/8)+(1+3/4)+(1+3... more
Verified Answer ✓
height of slot = (1+7/8)-(1/2) = 1.375 or (11/8) more
Verified Answer ✓
The dimension S is equal to P at the right-side ... more
Verified Answer ✓
See letter S more
Verified Answer ✓
The height of the projection can be seen in its ... more
Verified Answer ✓
I think it is hidden line more
Verified Answer ✓
Thick dark lines that show the edges and outline ... more